Quick answer
To fit a hand towel dispenser properly, choose the right location, mark and drill accurately, and secure the unit firmly—then test it with a towel refill to avoid jams.
Why placement matters more than you think
Where you mount the dispenser affects both convenience and hygiene. Place it near the sink but far enough to avoid splashes, and at a height that most users can reach comfortably—typically around 120–130 cm from the floor to the dispenser's bottom edge.
Also consider the traffic flow: in a busy washroom, a dispenser that blocks the door or mirror creates bottlenecks. Take a moment to visualize the space before drilling.
What to check before you drill
Before making holes, confirm the wall type (drywall, tile, or concrete) because each needs different fixings. Use a stud finder or tap the wall to locate solid support, and check for hidden pipes or cables.
Also verify the dispenser's dimensions against the wall space. For example, the Modular hand towel dispenser is 26 cm high and 29 cm wide—make sure you have at least that much clear area.
Step-by-step installation
- Choose the spot: Pick a location next to the sink, at least 30 cm from the basin edge to avoid splashes, and at a height where the dispenser's opening is about 120 cm from the floor. Check that the door and mirror don't obstruct access. Common mistake: mounting too close to the sink—water can damage the unit and towels.
- Mark the fixing points: Hold the dispenser against the wall and use a pencil to mark the screw holes. Use a spirit level to ensure the marks are even—a tilted dispenser jams towels and looks unprofessional. Checkpoint: measure twice, drill once.
- Drill and insert wall plugs: Use the correct drill bit for your wall type (masonry for brick/concrete, tile bit for ceramics). Drill the holes, insert wall plugs, and gently tap them flush with the wall. Common mistake: using the wrong plug size—if it's loose, the screws won't hold.
- Secure the dispenser: Align the dispenser with the holes and drive the screws in, but don't overtighten—this can crack plastic housings. Make sure the unit sits flush against the wall. Checkpoint: give it a gentle tug to confirm it's solid.
- Load and test with towels: Insert a full refill (for example, interleaved towels for the Modular dispenser) and pull a few towels to check the dispensing action. Adjust the tension or alignment if towels tear or jam. Common mistake: skipping the test—a jammed dispenser frustrates users and wastes paper.
Dispensers that make installation easier
-
Hand Towel Dispenser: The Modular hand towel dispenser holds up to 400 towels and fits interleaved, C-fold, Z-fold, and extra-narrow towels. Fewer refills and flexible towel types mean less maintenance after installation.
Hand Towel Dispenser
-
White Metal Dispenser For 10″ Rolls: The White Metal Dispenser is designed for 10-inch couch or wiping rolls. If you prefer roll towels, this model gives a sturdy, straightforward mount for continuous dispensing.
White Metal Dispenser For 10″ Rolls
After installation, keep a spare refill nearby and check the dispenser monthly for loose screws or wear. A well-fitted dispenser saves time and keeps your washroom presentable.
