Quick Answer
Install the KidCo Bamboo Angle Mount Safeway gate using the included hardware, aligning the gate to your staircase or hallway with the provided angle mount brackets. Secure it firmly to wall studs or balusters for maximum safety.
Why Angle Mounting Matters
Unlike standard gates that require perfectly aligned walls, the Bamboo Angle Mount Safeway is designed for top-of-stairs installations where walls or balusters don't align. This makes it ideal for angled staircases, awkward hallways, or as a room divider.
Because it's a hardware-mounted gate, it offers maximum safety without a bottom threshold to trip over—a common issue with pressure-mounted gates in high-traffic areas.
What You'll Need Before You Start
Gather a drill, appropriate drill bits for your wall material, a level, a pencil, and a stud finder. For drywall, use wall anchors if you can't hit a stud; for wood balusters, use the provided screws directly.
Check the gate's mounting hardware and read the manual thoroughly. The angle mount brackets allow for a custom fit, but you'll need to measure the exact angle of your stair rail or wall.
Installation Steps
- Measure and Mark: Using a level, mark the desired height on both sides of the opening. For stairs, position the gate at the top edge, ensuring the latch side is on the side you want to open. Mark screw holes with a pencil through the bracket template. Double-check that the gate is level before drilling; a tilted gate can cause the latch to misalign.
- Drill Pilot Holes: Using a drill bit slightly smaller than your screws, drill pilot holes at the marked locations. If you're mounting to drywall, insert wall anchors first. For wood balusters, drill straight into the wood. Avoid drilling into gaps between balusters; use a stud finder for walls to ensure a secure mount.
- Attach Mounting Brackets: Secure the angle mount brackets to the wall or balusters using the provided screws. Tighten them firmly, but avoid over-tightening which can strip the screw holes. Ensure brackets are flush against the surface; if not, adjust the angle before tightening fully.
- Mount the Gate Panel: With the gate in the closed position, align the gate's hinges with the brackets and slide or snap them into place. Secure any locking pins or screws as per the manual. Test the gate swings freely; if it binds, loosen and re-align the brackets slightly.
- Test the Latch and Safety: Open and close the gate several times to ensure the latch engages securely. Apply pressure to the middle of the gate to check for any give. The gate should feel rigid and unmovable when locked. If the gate flexes, check that all screws are tight and the brackets are properly anchored.
Product Facts
-
Bamboo Angle Mount Safeway: The KidCo Bamboo Angle Mount Safeway is designed for top of stairs installations, including tricky setups where walls or staircase balusters don't align. This means you can install it securely even on angled staircases, providing a safe barrier without the need for perfectly parallel walls.
Bamboo Angle Mount Safeway
-
Bamboo Angle Mount Safeway: As a hardware-mounted gate, it provides maximum safety—especially in high-traffic areas—since there's no bottom threshold to trip over, unlike pressure-mounted gates. You get a trip-free passageway, which is safer for adults carrying laundry or kids running around, and the gate stays firmly in place.
