Quick Answer
To install an expansion walk thru baby gate, measure your opening, assemble the gate, position it, and secure it with the hardware mount. Always check that the gate is firmly locked before letting your child near it.
Why Choose a Walk Thru Gate?
A walk thru baby gate is a convenient option for high-traffic areas because it opens in both directions, allowing adults to pass through easily without climbing over or removing the gate. The Evenflo Expansion Walk Thru Baby Gate Support is designed for extra-wide openings, making it a great choice for open floor plans or great rooms that are too wide for standard gates.
Hardware Mount vs. Pressure Mount: What's the Difference?
Many walk thru gates can be installed using either a hardware mount or a pressure mount. A hardware mount involves screwing the gate into the wall or door frame, providing a more permanent and secure installation. A pressure mount uses tension to hold the gate in place without screws, making it easier to remove but potentially less secure. The Evenflo Expansion Walk Thru Baby Gate Support uses a hardware mount attachment, which is easy to install and provides a sturdy barrier for high-traffic areas.
Step-by-Step Installation Guide
- Measure Your Opening: Use a tape measure to determine the width of the opening where you plan to install the gate. Ensure the measurement falls within the gate's range (24" - 60" for the Evenflo Expansion Walk Thru Baby Gate). Double-check the measurement at both the top and bottom of the opening, as walls may not be perfectly straight.
- Assemble the Gate: Lay out all parts and follow the manufacturer's instructions to assemble the gate. Confirm that all locking mechanisms are in place and functioning before proceeding. Test the latch mechanism before installation to ensure it opens and closes smoothly.
- Position the Gate: Place the gate in the opening and adjust its width to fit snugly. Make sure the gate is level and that the bottom edge sits flush against the floor. Use a level to check that the gate is straight; an uneven gate can compromise the latch alignment.
- Secure with Hardware Mount: Mark the screw holes on the wall or door frame, then drill pilot holes and attach the mounting brackets with the provided screws. Attach the gate to the brackets and tighten all screws securely. Ensure the screws are anchored into studs or solid wood, not just drywall, for maximum strength.
- Test the Gate: Open and close the gate several times to ensure it swings smoothly in both directions and that the latch engages fully. Apply firm pressure to the center of the gate to verify it doesn't budge. Re-check the gate after a few days of use, as screws can loosen with frequent opening and closing.
Product Facts
-
Expansion Walk Thru Baby Gate Support: The Evenflo Expansion Walk-Thru Room Divider Baby Gate accommodates openings 24" - 60". This wide range makes it ideal for extra-wide openings that standard gates can't cover, such as great rooms or open floor plans.
Expansion Walk Thru Baby Gate Support
