Quick Answer

To use the Breville Handy Mix Scraper, attach the scraper beater, plug in the mixer, and select a speed using the Beater IQ™ technology. The mixer automatically adjusts speed based on the attachment, so you can focus on scraping the bowl sides for even mixing.

What Makes the Handy Mix Scraper Different

The Breville Handy Mix Scraper features a flexible scraper edge that continuously wipes the bowl sides as you mix. This reduces the need to stop and scrape manually, saving time and ensuring ingredients are fully incorporated. The Beater IQ™ technology detects the scraper attachment and sets the optimal speed range automatically, so you don't have to guess.

Before You Start: Setup Tips

Ensure the Handy Mix Scraper is clean and dry before use. Insert the scraper beater into the mixer until it clicks into place. The Beater IQ™ system will recognize the attachment and limit the speed to prevent splattering. Always use a bowl that is deep enough to allow the scraper to move freely without hitting the sides.

Step-by-Step Guide to Using the Handy Mix Scraper

  1. Attach the Scraper Beater: Insert the scraper beater into the mixer until it locks. The Beater IQ™ will automatically set the speed range. Common mistake: Forcing the attachment. If it doesn't click easily, check alignment.
  2. Select Your Speed: Turn the speed dial to your desired setting. The mixer will only allow speeds safe for the scraper attachment. Checkpoint: Start on low to avoid splashing, then increase as needed.
  3. Mix and Scrape Simultaneously: Hold the mixer at a slight angle so the scraper edge contacts the bowl. Move the mixer around the bowl to incorporate all ingredients. Common mistake: Holding the mixer too upright—the scraper won't reach the bowl sides.
  4. Stop and Check Consistency: Pause the mixer and lift the beater to check if ingredients are fully combined. The scraper should leave minimal residue on the bowl. Checkpoint: If batter clings to the scraper, continue mixing for another 10–15 seconds.
  5. Clean the Scraper Beater: Remove the beater and rinse immediately under warm water. Use a soft brush to remove any dried batter from the scraper edge. Common mistake: Letting batter dry on the scraper—it can be harder to clean and may affect performance.

Key Product Fact

  • the Handy Mix Scraper™: Equipped with our Beater IQ™ technology, the Handy Mix Scraper™ detects which attachment you’ve inserted and adjusts to the optimal speed. This means you don't need to manually adjust speed settings when switching attachments—the mixer does it for you, reducing the chance of overmixing or splashing.