Quick answer
Use the 4-inch plug-to-clip wire to connect your Circuit Cubes Bluetooth Battery to an LED, Geared Motor, or High Speed Motor. The plug end fits the battery, and the clip end grips the component's terminals.
Why the 4-inch length works best for tight builds
The 4-inch plug-to-clip wire is shorter than standard options, making it ideal for compact models where excess wire can cause tangles or shorts. It keeps your build clean without forcing you to coil extra cable.
Common mistake: reversing the plug orientation
The plug end is keyed to fit the Bluetooth Battery port in one direction. Forcing it in backward can bend the pins. Align the flat side of the plug with the flat side of the battery port before pushing gently.
Step-by-step connection guide
- Step 1: Identify the plug end: The plug end is the small rectangular connector. Insert it into the Bluetooth Battery's output port, aligning the flat sides. Push gently until it clicks into place. If it doesn't click, flip the plug 180 degrees and try again.
- Step 2: Attach the clip to your component: Squeeze the clip's jaws open and slide them over the terminal of your LED, Geared Motor, or High Speed Motor. Release to let the clip grip firmly. Ensure bare metal touches metal. Check that the clip is not hanging by the insulation—bare wire must contact the terminal.
- Step 3: Test the connection: Turn on the Bluetooth Battery. If the component does not activate, wiggle the clip slightly or reseat the plug. A loose clip is the most common cause of intermittent power. If it still doesn't work, try a different port on the battery or swap the wire.
Product details
-
Plug-to-Clip Wire - 4 Inch / 10 cm: Purchase this wire if you need a way to connect your Bluetooth Battery to your LED, Geared Motor, or High Speed Motor. Includes one 4-inch plug-to-clip wire. One wire handles all three common Circuit Cubes components, so you don't need separate cables for different builds.
Plug-to-Clip Wire - 4 Inch / 10 cm
