Quick answer

A vacuum sealer suction tube is a small attachment that connects your vacuum sealer to compatible containers and jar lids, letting the machine pull air out through a port instead of a bag. Use it when you want to vacuum-seal leftovers, dry goods, or liquids in a reusable container rather than a plastic bag. The SuperSeal Vacuum Sealer Suction Tube (product 75616) is the matching tube for your SuperSeal sealer and works with compatible containers to help keep foods fresh longer.

What a suction tube actually does

A suction tube is the bridge between your vacuum sealer and any container that has a vacuum port. Instead of sealing a bag, you push one end of the tube onto the sealer's vacuum nozzle and the other end onto the container's port. When you run the sealer, it pulls air out of the container through the tube. The container's lid or valve then holds the vacuum until you release it. This matters because bags are not always the right shape or material for what you're storing — containers are reusable, stackable, and better for soft or liquid foods that would get crushed in a bag.

How to attach and use the suction tube step by step

Start with a clean, dry container and a lid that is designed for vacuum sealing. Fill the container, leaving headspace at the top — more for liquids, less for dry goods. Place the lid on securely. Push one end of the suction tube firmly onto the vacuum port on your sealer and the other end onto the container's port. Run the sealer in vacuum mode. You will hear the motor change pitch as air is removed. When the sealer stops, gently remove the tube from the container port first, then from the sealer. Do not tug the tube while the vacuum is still active; that can pull the container off the counter or damage the port.

Which containers work with a suction tube

The tube only works with containers that have a matching vacuum port or a lid with a built-in valve. Not every plastic or glass container is vacuum-compatible. Check the container's instructions or look for a port that the tube can press onto. If a container has no port, the suction tube cannot create a vacuum inside it. For jars, you typically need a jar attachment or a lid with a port — the tube alone does not seal a plain jar lid. If you are unsure whether a container is compatible, test it with a small amount of food and watch for the lid to hold its seal after you remove the tube.

Common mistakes and how to avoid them

The most common mistake is trying to vacuum-seal a container that is not designed for it. That can crack the container or fail to hold a seal. Another is overfilling: liquids can get pulled into the tube and into the sealer, which is messy and can damage the machine. Leave at least an inch of headspace for liquids and freeze liquid-heavy foods before vacuum sealing if you can. Finally, don't leave the tube attached to the sealer when you store it. Remove it, wipe it down, and keep it with your other vacuum sealer accessories so it doesn't get lost or crushed.

Cleaning and storing the suction tube

The suction tube is a small part, but it still needs care. After each use, disconnect it and wipe the outside with a damp cloth. If food or liquid got inside the tube, rinse it with warm water and let it air dry completely before storing. Do not put it in the dishwasher unless the manufacturer says it is dishwasher-safe — the catalog does not list dishwasher compatibility for this tube, so hand washing is the safer choice. Store the tube loosely coiled or straight, not kinked, and away from sharp objects that could puncture it.

Suction tube FAQ

Can I use the suction tube with any container?

No. The container needs a vacuum port or a lid with a valve that the tube can connect to. Plain containers without a port will not hold a vacuum. Check for a port before you buy or try a container.

Do I need a separate jar attachment to vacuum-seal jars?

Usually yes. A suction tube connects to a port, but most jars need a dedicated jar lid or attachment that creates the vacuum seal. The tube alone does not seal a standard jar lid. Match the accessory to the container type.

How do I know the vacuum worked?

The lid should feel tight and slightly concave, and it should stay sealed after you remove the tube. If the lid pops back immediately, the seal did not hold. Test with a small amount of food first.

Can I vacuum-seal liquids with the suction tube?

You can, but leave generous headspace and freeze liquids first if possible. Otherwise liquid can get pulled into the tube and into the sealer. Freeze first or leave extra headspace.

Product facts

  • SuperSeal™ Vacuum Sealer Suction Tube: Compatible with your SuperSeal Vacuum Sealer, this suction tube removes air from compatible containers to help keep foods fresh longer. If you already own a SuperSeal sealer, this is the matching tube for vacuum-sealing containers instead of bags, which is useful for leftovers, dry goods, and liquids.