Quick answer

Snap the 3D printed holder onto your Skadis pegboard, then slide your RG35XX SP into the cradle. No tools required, but alignment matters for a snug fit.

Why a dedicated stand beats a shelf

A flat shelf takes up desk space and lets your handheld slide around. The Skadis stand organizer holds the RG35XX SP at a slight angle, making it easy to grab and keeping the screen visible. The 3D printed design also frees up pegboard hooks for cables or other accessories.

What to check before you start

The holder is printed in PLA and fits the standard Skadis pegboard hole pattern. If your pegboard is a third-party clone, verify the hole spacing matches IKEA's 20 mm grid. The holder works with any color option; choose one that matches your setup or handheld shell.

Step-by-step setup

  1. Locate the pegboard position: Choose a spot on your Skadis board where the holder won't interfere with other hooks or items. Hold the stand against the board and check that the two mounting tabs align with two adjacent holes. If the tabs don't align, rotate the holder 180° — the design is symmetrical on one axis.
  2. Insert the top tab first: Tilt the holder so the top tab enters its hole at a slight downward angle. Push it in until the tab is fully seated, then rotate the bottom of the holder toward the board. Forcing both tabs at once can snap the thin PLA tab. Always start with the top.
  3. Snap the bottom tab into place: Press the bottom tab gently into its hole. You should hear or feel a light click. The holder should sit flush against the board with no wobble. If it wobbles, remove the holder and check that no debris is blocking the holes. A slight sanding of the tab edge can help on tight boards.
  4. Insert your RG35XX SP: Slide the handheld into the cradle from above. The stand holds it vertically with the screen facing outward. Ensure the console is fully seated so it doesn't tilt forward. Avoid dropping the console in — the cradle is snug by design. A gentle slide prevents scratches on the handheld edges.

Product used in this guide

  • 3D Printed Skadis Stand Organizer Holder for RG35XX SP: 3D Printed Design: Precisely crafted with premium quality PLA for durability and a perfect fit. PLA is rigid enough to hold the console securely without scratching it, and the precision print ensures the Skadis tabs lock in place.

    3D Printed Skadis Stand Organizer Holder for RG35XX SP

    3D Printed Skadis Stand Organizer Holder for RG35XX SP