Quick Answer
Place the Westmark induction adapter plate on your induction hob, then set your non-induction pot or pan on top. The plate heats up and transfers heat to your cookware, letting you use almost any pot on an induction stove.
Why You Might Need an Induction Adapter Plate
Induction cooktops only work with ferromagnetic (magnetic) cookware. If your favorite stainless steel or aluminum pots aren't magnetic, they won't heat up directly. An induction adapter plate acts as a bridge: it sits on the hob, gets hot, and transfers that heat to your non-induction cookware.
One trade-off is that the adapter plate adds a layer between the heat source and your pan, so heating may be slightly slower than with direct induction. Also, the plate itself gets very hot, so handle it with care.
Step-by-Step Guide to Using an Induction Adapter Plate
- Step 1: Check Your Cooktop and Plate: Ensure your induction cooktop is clean and dry. Place the Westmark induction adapter plate directly on the cooking zone. Make sure it sits flat and centered. A dirty or wet cooktop can cause uneven heating or slipping.
- Step 2: Set Your Non-Induction Pot on the Plate: Place your non-induction pot or pan on top of the adapter plate. The pot should be centered and stable. Avoid using pots smaller than the plate, as they may tip. Using a pot that's too small can lead to instability and uneven heat distribution.
- Step 3: Turn On the Induction Hob: Turn on the induction cooktop and set the heat level. Start with a medium setting to avoid overheating the plate. The plate will heat up and transfer heat to your pot. Starting on high heat can overheat the plate and damage your cooktop or pot.
- Step 4: Monitor and Adjust Heat: Watch the cooking process. The adapter plate may take a little longer to heat than direct induction. Adjust the heat as needed to maintain a steady simmer or boil. The plate retains heat, so lower the setting a bit before turning off to avoid overcooking.
- Step 5: Remove the Plate Safely: After cooking, turn off the hob and let the adapter plate cool completely before handling. Use oven mitts or tongs to remove it if needed. The plate stays hot for a while after the hob is off—never touch it with bare hands.
Product Facts
-
Induction adapter plate, Ø 24 cm: This Westmark induction adapter plate has a diameter of 24 cm and is designed for use with induction cooktops. The 24 cm size fits most standard pots and pans, and the plate makes non-induction cookware usable on your induction hob.
Induction adapter plate, Ø 24 cm
